A Global Rack For Download

The free UVI Workstation sampler works great as an external sound source for HN2. Download these files and setup a global rack in minutes.

NOTE: This is for HN2 and HN2 LE. There's a different tutorial for Synfire.

UPDATE: In the meanwhile UVI seem to have removed the Demo Soundpack download from their site, so these instructions might not help you much unless you already have some UVI content installed.

Eliminates High Latency on Windows

While on OS X, the default DLSMusicDevice AudioUnit isn't that bad, its counterpart on Windows, the Microsoft GS Wavetable Synth, has a very high latency that renders it almost useless, at least for recording. The freely available UVI Workstation helps to get better and more responsive sounds on Windows, and also OS X.

Free UVI Workstation

uvishot.pngThe free sample player UVI Workstation and a UVI Demo Soundpack are available from UVI's website for free here: http://www.uvi.net/en/software/uvi-workstation.html  

Windows 7, Windows 10

  1. Make sure HN2 is installed and has run at least once. During installation, please keep the default suggested folders unchanged.
  2. Verify that LoopBe30 or an equivalent MIDI Loopback Driver is installed and working (we got a tutorial on setting it up).
  3. Download and install the UVI Workstation and UVI Demo Soundpack from the link above. Keep all suggested default options unchanged. After unpacking UVI Demo Soundpack ZIP, move the file UVI Demo Pack.ufs to the folder C:\User\<yourname>\Documents\UVISoundBanks
  4. Download our ZIP for Windows attached below. It includes a global rack ("UVIGlobal.cogsetup") and an associated device description ("UVI_UVIWorkstationVST_Multi.device") and a preset for the sampler ("UVIGlobal.uviws"). Unpack the ZIP to a new folder on your hard drive.
  5. Run UVI Workstation by double-clicking the file UVIGlobal.uviws. Make it listen to "1. Internal MIDI", or another loopback port.
  6. Start HN2, goto Playback >> Audio & MIDI Setup. Goto the tab Gobal Sounds, then to the tab Global Device Descriptions. Open the options menu with the cogwheel and import the device description UVI_UVIWorkstationVST_Multi.device with Open And Add ... Alternatively, you can download the device from our online repository from within HN2.
  7. Open the rack UVIGlobal.cogsetup with File >> Open. Save it as CurrentRack.cogsetup in your computer user's Documents folder under Harmony Navigator 2/Config/Racks. This will make HN2 load this rack on startup automatically.
  8. Verify on the tab Global Sounds that the rack module is sending to the port you have selected for input at the UVI Workstation.
  9. Switch to the Global Instruments tab and verify all instruments are indicated green (if you see orange or red indicators, you may need to re-assign the new sounds). Play any of the five instruments using the small Play buttons next to them. Don't forget to save the rack (Ctrl-S).

OS X

  1. Make sure HN2 is installed and has run at least once. During installation, please keep the default suggested folders unchanged.
  2. Verify that Apple's IAC loopback driver is working (we got a tutorial on setting it up).
  3. Download and install the UVI Workstation and UVI Demo Soundpack from the link above. Keep all suggested default options unchanged. After unpacking the UVI Demo Soundpack ZIP, move the file UVI Demo Pack.ufs to the folder /Library/Application Support/UVISoundBanks (The Library folder is on top of your startup volume and may be hidden. If so, open it from the Finder's main menu with Go)
  4. Download and unpack our ZIP for OS X attached below. It includes a global rack ("UVIGlobal.cogsetup") and an associated device description ("UVI_UVIWorkstation_Multi.device") and a preset for the sampler ("UVIGlobal.uviws").
  5. Run UVI Workstation by double-clicking the file UVIGlobal.uviws. Make it listen to "1. Internal MIDI", or another loopback port.
  6. Start HN2, goto Playback >> Audio & MIDI Setup. Goto the tab Gobal Sounds, then to the tab Global Device Descriptions. Open the options menu with the cogwheel and import the device description UVI_UVIWorkstation_Multi.device with Open And Add ... Alternatively, you can download the device from our online repository from within HN2.
  7. Open the downloaded rack with File >> Open. Save it as CurrentRack.cogsetup in your computer user's Documents folder under Harmony Navigator 2/Config/Racks. This will make HN2 load this rack on startup automatically.
  8. Verify on the tab Global Sounds that the rack module is sending to the port you have selected for input at the UVI Workstation.
  9. Switch to the Global Instruments tab and verify all instruments are indicated green (if you see orange or red indicators, you may need to re-assign the new sounds). Play any of the five instruments using the small Play buttons next to them. Don't forget to save the rack (Command-S).

Of course, this is a very basic global rack with only a few sounds. At least it gets you started quickly.

There are more free sound libraries from other sources, that can help you build a rack to start with.

*) Trademarks: UVI, UVI Workstation, Native Instruments, Kontakt, Kontakt Player and Factory Selection Library are trademarks of Native Instruments, Berlin and UVI, France respectively. Cognitone is not affiliated with or endorsed by Native Instruments or UVI in any way. The above mentioned resources are made available to the public by Native Instruments and UVI. We provide these tipps and links for your convenience only.

Rating: 
0
No votes yet

Scholarly Lite is a free theme, contributed to the Drupal Community by More than Themes.