Direkt zum Inhalt

still having midi input problems (fix found)

Posted

fresh install win 8 64bit. maudio keystation32

start up synfire recognizes keystation - selected midi input. it turns red - but no response when pressing keys.

when i switch to microsoft gs tab underneath the then the keystation triggers the microsoft gs sounds.

 

im stuck here - any ideas?

 


Fr., 08.02.2013 - 17:57 Permalink

synfire 1.6.6 build3 audio engine 1.81

if i turn off use audio engine for midi input - theres no sound however the midi data light comes on and im able to record, i see the data tracking into the arrangement window.

midi through is enabled in arrangement view and in the settings view.

 

my daw <reaper> is not open and before opening synfire i opened reaper and disabled all midi devices - so no conflict there.

 

 

Fr., 08.02.2013 - 18:16 Permalink

You will not hear any sound unless you have set a destination for incoming MIDI data by clicking on an instrument in your arrangement or the setup window. Midi through always goes to the last selected instrument. That instrument needs to have a plug-in loaded with sounds, or synth hardware connected.

The small red box next to the transport buttons hoewever should flicker in any case. If this is not the case, no MIDI is  received by Synfire.

If your sounds are hosted in a DAW, please check if the tracks are armed for recording (monitoring must be on).

Fr., 08.02.2013 - 18:26 Permalink

Hi thankyou for response,

Daw is closed, Im hosting a simple piano vsti as a shared rack on node2 engine 1 <64bit>

should the 32bit engine also be showing in the connected hosts?\\

 

 

 

Fr., 08.02.2013 - 18:33 Permalink

You can launch any of the 32 or 64 bit engines as you need them, but on Windows this might not work as well as it does on OS X. Windows has issues with running multiple audio applications at the same time. ASIO at least. Works better with Windows' own audio system.

Fr., 08.02.2013 - 18:58 Permalink

What i dont get is that when i press the tab under my keystation device - its the microsoft gs wavetable device - then the midi lights flicker on and off

Sa., 09.02.2013 - 05:42 Permalink

How is synfire different from other windows software which requires midi input?

 

I opened the console log -  does anyone know how to resolve?

*** Unable to send MIDI through to 'Keystation Mini 32' (infinite loopback protection)
*** Unable to send MIDI through to 'Keystation Mini 32' (infinite loopback protection)
*** Unable to send MIDI through to 'Keystation Mini 32' (infinite loopback protection)

 

Fr., 22.02.2013 - 14:35 Permalink

I got some clues from  discosleepy - thanks disco!

 

-run sfp as administrator.