Direkt zum Inhalt

want to have to synfire shortcuts: x86 and x64 engine

Posted

Hi,

 

I want to make two shortcuts for synfire, one so it startsup the x86 Audio engine, and the other starting up with the x64 Audio Engine.

 

This because on W7 its tricky to shut down the 64 bit engine to change to the 32 bit one, and vice versa.

 

How to? thanks,

 

Jim


Mo., 04.11.2013 - 09:20 Permalink

You could create two different global racks, one set to prefer 64 bit and using only that, the other using 32 bit plug-ins only.

 

Mo., 04.11.2013 - 12:05 Permalink

would it be possible to code it so you could have both engines running at the same time?

 

 

Mo., 04.11.2013 - 15:27 Permalink

That's on the agenda.

On the Mac, this works without problems, but on Windows only a single program can access the audio hardware at a time. Although I think this is a stupid restriction, we have to live with it somehow.

Mo., 04.11.2013 - 19:40 Permalink

Andre,

 

Thank  you for the reply.

 

I have two global racks (one 32, one 64 bit). However, switching between them while  Synfire is running is difficult, because if i.e. the 32 bit rack (and engine) is already running, switching to (loading) the 64 bit rack opens the 64 bit engine on ASIO4ALL driver, not my real ASIO driver (as W7 cannot have both 32 and 64 bit engines running at the same time with ASIO).

 

As Synfire has the habit of opening and preloading the last loaded rack (correct me if I'm wrong), you have to switch off and restart synfire twice in order to get the preferred engine (32/64bit in real ASIO). Also, quitting/shutting down the Engine first (while synfire is still running) before loading the other rack, is not convenient, as synfire starts to report that it can no longer connect to the engine (of course).


Hence my question, if it were possible (i.e. by a batch command/shortcut), to order synfire which global rack to load on a clean startup (irrespective of what rack was previously opened).

 

REgards,

Jim

Di., 05.11.2013 - 15:37 Permalink

Hence my question, if it were possible (i.e. by a batch command/shortcut), to order synfire which global rack to load on a clean startup (irrespective of what rack was previously opened).

Not yet, but sounds like a great feature suggestion.

Mi., 06.11.2013 - 22:44 Permalink

How about having 2 versions of Synfire, one 32 bit and the other 64 bit.  Most other software works like this doesn't it?