Sound only after recording

6 posts / 0 new
Last post
AndreasHe's picture
AndreasHe
Offline
Last seen 2 months 2 weeks ago

Sound only after recording

In relation to that thread:

https://users.cognitone.com/topic/ich-hore-nichts-mehr

 

When I open the Synfire and Midi-Pass-Through (Icon top right) is enabled, I do not hear any sound when playing the keys.

First I need to record for a second. After that it works.

Tanerongunyzb's picture
Tanerongunyzb
Offline
Last seen 15 hours 18 min ago

Use panic button my friend.

AndreasHe's picture
AndreasHe
Offline
Last seen 2 months 2 weeks ago

What do you mean?

andre's picture
andre
Offline
Last seen 14 hours 15 min ago

Synfire needs to know which instrument is to receive the MIDI Through events. Therefore you need to select an instrument once, before MIDI Through from your keyboard is going to that instrument. Recording is not necessary. Just select an instrument.

AndreasHe's picture
AndreasHe
Offline
Last seen 2 months 2 weeks ago

So I tried after a fresh start (not in matrix) . But no sound. 

andre's picture
andre
Offline
Last seen 14 hours 15 min ago

If MIDI Through is on and you selected an instrument, all MIDI input is going to that destination.

If you're on Windows, another program may intercept your MIDI input (a DAW?). Windows USB drivers sometimes have this issue, as they are not multi-client capable. You need to make sure Synfire receives your MIDI keyboard input first. Check that in Audio & MIDI Setup.

Log in or register to post comments

Scholarly Lite is a free theme, contributed to the Drupal Community by More than Themes.